Proficient Road Transport Dangerous Goods Driver Course (NQF 3) in South Africa
The Proficient Road Transport Dangerous Goods Driver course (SP-241201) prepares you to move dangerous goods by road safely and legally. You learn the nine classes of dangerous goods, UN numbers and proper shipping names, labels and placards, the dangerous goods declaration and TRECARD, then practise checking documents and packaging, inspecting vehicles before, during and after a trip, and loading, transporting and offloading dangerous goods.
It is a QCTO skills programme at NQF Level 3 with 8 credits (3 knowledge, 5 practical), and TETA is the quality partner for development. Entry requires an NQF Level 2 qualification. This dangerous goods driver course is delivered from Wheelset Academy's Pretoria and Kempton Park branches.
Share your details to access the brochure
What the Dangerous Goods Driver course covers
The 8-credit skills programme is built from three knowledge modules (1 credit each) and four practical skill modules (1, 1, 1 and 2 credits), with no work experience module.
Knowledge modules · 3 credits
Classification (1), Legislation and regulations (1), Responsibilities and duties (1)
- The nine classes of dangerous goods, packing groups, UN numbers and proper shipping names
- The dangerous goods list, transport hazard labels and placards, GHS pictograms and safety data sheets
- The designated space in the vehicle and the documents that must be carried in it
- UN Model Regulations, ADR and IMDG, SANS standards and the National Road Traffic Act as they apply to drivers
- Training requirements, driver and vehicle requirements, route plans and multi-modal documentation
- Vehicle suitability, compatibility and segregation, loading and stowage, load securement and emergency response
- Security requirements, hijacking risks, incident reporting and emergency response
Practical skill modules · 5 credits
Documents (1), Compliance checks (1), Inspections (1), Handle, load and offload (2)
- Confirm labelling and marking match packaging, and check placarding against the dangerous goods declaration
- Check the designated space, its position and the legally required documents
- Conduct compliance checks on documents, declarations, packaging, labelling and placarding, and record and report non-compliance
- Check packaging for the specific transport mode and complete the pre- and post-loading checklist
- Conduct pre-, in-transit and post-trip inspections, verify roadworthiness and load compliance, and keep the vehicle clean
- Execute transport plans, load and offload dangerous goods, perform en route load securement checks and implement emergency response plans
Learners who complete the modules and pass the required assessments receive a QCTO skills programme certificate. Recognition of Prior Learning (RPL) is available for learners who can show the required competencies.
Documents, placards and vehicle checks before you move a load
Dangerous goods incidents often start with a missing document, a wrong placard or an incompatible load. This programme gives four practical modules to the checks you make before and during the trip, in a real or simulated dangerous goods environment with SDS, DGD, TRECARD, placards and checklists.
Read the documents
Read a safety data sheet, dangerous goods declaration and TRECARD and confirm that packaging, UN number, labels and placards match the hazard.
Check the vehicle and the load
Inspect the vehicle, verify roadworthiness, check compatibility for mixed loads and confirm the designated space and its documents.
Move it and respond
Follow the route plan, check the load at stops, record your checks and use your emergency response plan if there is a leak or incident.
Classes, labels, declarations and trip checks in practice
- Identify the nine classes of dangerous goods and what each means for packaging and labelling
- Read a UN number and proper shipping name on the dangerous goods list
- Match labels and placards to the dangerous goods declaration
- Interpret a safety data sheet and a TRECARD
- Check the designated space, its colour, markings and position and the documents in it
- Check compatibility, segregation and separation for mixed loads
- Complete pre- and post-loading checklists and a vehicle inspection fault report
- Load dangerous goods onto a vehicle and secure them
- Check the load en route at stops and record what you find
- Plan a route that avoids high-risk areas and follow the trip plan
- Use PPE and emergency equipment as instructed in an emergency
- Offload, then inspect and document the condition of the goods
Dangerous goods driver course duration, entry requirements, cost and certificate validity
The questions drivers and fleet managers ask most before enrolling, answered from the curriculum and checked against what other providers publish.
Course duration
The curriculum sets 8 credits, which at the standard 10 notional hours per credit is about 80 hours of learning. One publisher describes the programme as about 80 hours, or about two weeks, and another provider lists two months. Wheelset Academy will confirm its schedule with admissions.
Entry requirements
The curriculum requires an NQF Level 2 qualification. Some providers also ask for a certified ID copy and a valid driving licence (code C1 or EC/EC1), so ask admissions which documents we need. If you do not meet the formal entry requirement, ask about Recognition of Prior Learning (RPL).
Course cost
Our current fee is on the fees page. Providers publish prices for the older two-day unit-standard course from R850 excluding VAT to R2,219.50 including VAT, and most do not publish a price for the 8-credit programme, so compare what each price includes.
Certificate validity
The curriculum does not state a validity period for the QCTO skills programme certificate. Providers of the older unit-standard course quote one or two years, which is a different product, so ask admissions what applies to your certificate and any refresher requirement.
Proficient programme, refresher programme or Convey Dangerous Goods by Road?
Three different offerings share the dangerous goods driver name. They are not interchangeable, so check the programme code before you pay.
This programme: SP-241201
Proficient Road Transport Dangerous Goods Driver, NQF Level 3, 8 credits, with three knowledge modules and four practical modules. It is the full programme and the entry route for the refresher.
The refresher programme: SP-250306
Road Transport Dangerous Goods Driver, NQF Level 3, 4 credits, curriculum code 900282-001-00-00. Providers state that it requires the Proficient certificate first and adds a final integrated summative assessment.
Convey Dangerous Goods by Road
SAQA unit standard 123259, NQF Level 3, 4 credits, usually taught over one or two days. SAQA shows its registration end date as 30 June 2023, a last enrolment date of 30 June 2029 and a last achievement date of 30 June 2032, and one publisher reports a 36-month extension. Skills programmes are expected to replace it gradually.
The curriculum does not say that this programme meets any PrDP (D) requirement. Providers of the older course describe it as the route to a dangerous goods PrDP, so ask the licensing authority and your provider what applies to you before you enrol.
Who should take the Proficient Road Transport Dangerous Goods Driver course
Is this programme right for you?
- You drive, or will drive, a vehicle that carries dangerous goods by road
- You are a tanker driver or work in chemicals, fuel, agriculture, mining or manufacturing logistics
- You are a transport supervisor, controller or scheduler who needs to understand driver duties
- You work in freight forwarding or consignment and handle dangerous goods documents
- You hold NQF Level 2 and want a recognised, credit-bearing dangerous goods programme
By the end you will be able to
- Classify goods into the nine classes and read UN numbers and proper shipping names
- Check labels, placards, packaging and the dangerous goods declaration against each other
- Read a safety data sheet and a TRECARD and use them in an incident
- Inspect the vehicle before, during and after a trip
- Load, secure, transport and offload dangerous goods safely
- Record, report and respond to non-compliance and emergencies
Training methodology: how the course is delivered, assessed and certified
The knowledge modules can be delivered face-to-face, online or blended, and the practical modules are face-to-face.
Delivery
Practical modules use a real or simulated dangerous goods environment with placards, a designated space, TRECARD, DGD, SDS, example hazard diamonds, example cargo transport units and a spill kit, plus checklists and logbooks.
Assessment
You are assessed against internal criteria for each knowledge and practical module, for example confirming that labels and placards match the declaration, completing checklists and carrying out trip inspections correctly.
Certificate
The provider confirms your results in a statement of results. After the final integrated summative assessment the QCTO issues the skills programme certificate. Learners with prior learning can ask about RPL.
Why train your drivers on this programme
A dangerous goods incident can injure people, damage the environment and expose the operator to penalties. Providers link dangerous goods training to Chapter 8 of the National Road Traffic Act, so confirm the legal requirement for your operation with the licensing authority. A registered QCTO skills programme gives each driver defined, assessed outcomes and a statement of results, which supports your compliance and skills development records. Group intakes can be arranged by contacting admissions.
Benefits of the QCTO Proficient Dangerous Goods Driver programme
Recognised and credit-bearing
A QCTO skills programme at NQF Level 3 with 8 credits, rather than a certificate of attendance.
Practical, not just legal
Four practical modules train you to check documents, inspect vehicles, load safely and respond to incidents.
A route to progression
It is the entry point for the refresher programme and points toward supervisory, controller, scheduler and freight roles.
QCTO Skills Programme vs. a short convey dangerous goods course
Many dangerous goods driver courses in South Africa last about two days and are based on a unit standard. Use this to see how the QCTO skills programme differs.
| Consideration | Proficient Dangerous Goods Driver | Typical short dangerous goods course |
|---|---|---|
| Formal recognition | QCTO skills programme SP-241201, NQF Level 3, 8 credits, with TETA as quality partner | Often a unit-standard course such as Convey Dangerous Goods by Road, NQF 3, 4 credits |
| Structure | Three knowledge modules and four face-to-face practical modules | Usually a two-day classroom course |
| Practical proof of skill | Document checks, placarding, inspections, loading and emergency response against set criteria | Varies; often written assessment |
| Entry | NQF Level 2, with RPL available | Often a driver's licence and ID |
| Facilitator standard | NQF Level 5 facilitator competence and five years' dangerous goods experience | Varies |
| Best suited to | Drivers and operators who want a credit-bearing dangerous goods skills programme | Someone who needs a short certificate |
If you're not sure which fits your situation, contact admissions before applying — see the contact details below.
Verify this programme yourself
Page information reviewed: 25 October 2026.
Skills Programme SP-241201
This is a QCTO skills programme, identified by its Skills Programme ID (SP-241201) and curriculum code (900282-000-00-00). Skills programmes are not given a SAQA qualification ID. A refresher programme (SP-250306, 4 credits, curriculum code 900282-001-00-00) and the older unit standard Convey Dangerous Goods by Road (SAQA US 123259, 4 credits) are different products, so confirm the programme code and credit value before you pay. The curriculum does not state that this programme meets any PrDP (D) requirement, so confirm any permit question with the licensing authority.
The curriculum requires the provider to be approved by the Minister of Transport under the National Road Traffic Act 93 of 1996 for dangerous goods drivers of all classes of vehicles. Facilitators and assessors need NQF Level 5 facilitation or assessment competence and five years' dangerous goods experience, with a ratio of 1 facilitator to 20 learners.
Check QCTO accreditation · SAQA · Wheelset Academy accreditations page
Dangerous goods driver career opportunities
The programme is linked to the occupation Tanker Driver (also called Dangerous Goods Driver). The curriculum names work in the dangerous goods sector across chemicals, agriculture, mining, manufacturing, rail, maritime, air, freight and road. Learning routes include:
- Dangerous Goods Driver
- Tanker Driver
- Freight Driver
- Road Transport Supervisor
- Transport Controller
- Scheduler
- Freight Forwarding Staff
- Consignment Clerk
For further study, the curriculum points to supervisor, controller, scheduler, freight forwarding and consignment roles. A separate Road Transport Dangerous Goods Driver programme exists at a lower credit value. Confirm progression options with admissions.
Job titles vary by employer and experience. A skills programme supports career preparation but does not guarantee a specific title, salary or appointment.
Proficient Road Transport Dangerous Goods Driver course FAQs
What is the Proficient Road Transport Dangerous Goods Driver course?
It is a QCTO skills programme (SP-241201) at NQF Level 3 with 8 credits. It prepares you to classify, document, load, transport and offload dangerous goods by road while meeting South African and international requirements.
What are the nine classes of dangerous goods?
Explosives; gases; flammable liquids; flammable solids and substances that react with water or ignite spontaneously; oxidising substances and organic peroxides; toxic and infectious substances; radioactive material; corrosive substances; and miscellaneous dangerous substances, including environmentally hazardous ones.
What are the entry requirements?
You need an NQF Level 2 qualification. Some providers also ask for a certified ID copy and a valid driving licence (code C1 or EC/EC1). If you do not meet the formal entry requirements, ask admissions about Recognition of Prior Learning (RPL).
How many credits does the programme carry, and how long does it take?
8 credits in total: 3 knowledge and 5 practical. At the standard 10 notional hours per credit that is about 80 hours, which one publisher describes as about two weeks. Knowledge modules can be face-to-face, online or blended, and the practical modules are face-to-face. Wheelset Academy has not published a fixed duration yet, so confirm the intake structure with admissions.
How much does the course cost?
Wheelset Academy's current fees are on the fees page. Providers publish prices for the older two-day unit-standard course from R850 excluding VAT to R2,219.50 including VAT, so compare what each price includes.
What is the difference between SP-241201 and SP-250306?
SP-241201 is the full Proficient programme at 8 credits. SP-250306 is a 4-credit refresher programme that providers say requires the Proficient certificate first.
What is the difference between this and Convey Dangerous Goods by Road?
Convey Dangerous Goods by Road is SAQA unit standard 123259, 4 credits, usually taught over one or two days. SAQA shows a last enrolment date of 30 June 2029 and a last achievement date of 30 June 2032. This is the QCTO skills programme that is expected to replace it over time.
Does this programme give me a dangerous goods PrDP (D)?
The curriculum does not say so, and this page does not claim it. Ask the licensing authority and your provider what you need for a professional driving permit with a dangerous goods endorsement.
What practical skills will I practise?
Checking labels, marking and placards against a dangerous goods declaration, checking the designated space and documents, compliance checks and reporting, trip inspections, loading and offloading, en route load checks and emergency response.
What is a TRECARD and a dangerous goods declaration?
A TRECARD is the transport emergency card that tells you how to respond to an incident involving a particular substance. The dangerous goods declaration (DGD) describes the load, its class and its packaging. The programme teaches you to read and check both.
How long is my certificate valid?
The curriculum does not state a validity period for the QCTO skills programme certificate. Providers of the older unit-standard course quote one or two years. Ask admissions what applies to your certificate and any refresher requirement.
Is dangerous goods training required by law?
Providers link dangerous goods training to Chapter 8 of the National Road Traffic Act 93 of 1996. Confirm the legal requirement for your operation with the licensing authority, because the rules and transitional arrangements have changed.
How is the course assessed, and what certificate do I get?
You are assessed against internal criteria for each module, the provider issues a statement of results, and you take the final integrated summative assessment. On success the QCTO issues a skills programme certificate.
What must a provider have to offer this programme?
Approval from the Minister of Transport under the National Road Traffic Act, a facilitator with NQF Level 5 facilitation skills and five years' dangerous goods experience, and access to a real or simulated dangerous goods environment.
Is part of the course online?
The knowledge modules can be delivered online or blended. The practical modules are face-to-face because they need placards, documents, vehicles and cargo.
Where can I go after this programme?
The refresher programme SP-250306 and, according to the curriculum, supervisor, controller, scheduler, freight forwarding and consignment roles. Confirm progression options with admissions.
Who quality-assures this programme?
It is a QCTO skills programme, with TETA as the quality partner for its development. Confirm Wheelset Academy's accreditation scope with admissions or the QCTO before enrolling.
How do I apply?
Review the current fees and intake information, then submit your application through Wheelset Academy's online application page. Admissions can confirm the programme duration, check your documents and confirm accreditation scope before registration is finalised.
Ready to move dangerous goods safely and legally?
Apply for the Dangerous Goods Driver course, or compare it with Wheelset Academy's other safety programmes first.
Programme information reviewed: 25 October 2026. The programme identifier, curriculum code, NQF level, credit values and entry requirement above reflect the QCTO curriculum document. A refresher programme and an older unit standard use similar names. No SAQA ID is shown because skills programmes do not carry one. The duration is not yet confirmed. Fees, intakes, delivery mode and accreditation scope can change and should be confirmed with Wheelset Academy before enrolment.